Front oval, sides rounded, back straight. 6 mm iron plate as sole. Two wooden handles Ø 1.5/3 cm fastened from below on the plate. Chip hole in the middle of the iron, front Ø 30 mm. Iron angle 35x45 mm, length above 10x16 mm, with 30 mm long 8 mm screw thread, metric 60° DIN 13/14 1.25, fastened from below with two screws to the sole plate. Iron square 24x24/29 mm, 24 mm high, with screw thread in the raised back. Hole 16x16 mm, 46 mm long, 8 mm screw (same thread), with 10 mm grooved round head Ø 23 mm to clamp the iron. Same nut above for height adjustment.

Iron: 10 mm, 68 mm long, shaft 6x16 mm, rounded below 23 mm, angled. Bevel on top.