Fine plane. Cast iron box with 3.5 mm wall thickness. From the front: Knob Ø 2/3.5 cm, height 6 cm. Small crosspiece, mouth 6x45 mm. Side walls 5 mm, middle rounding 31 mm at the front, 7 mm at the back. Inside on both sides, two cams in the casting with 5 mm threads and 35 mm threaded rods with knurled nuts Ø 16 mm angled at 50°. Between them, a cast cam is vertical to the iron with a 15 mm long 5 mm blade cap screw. Directly behind it, as the iron stop, is a vertical square cast iron piece, 10x10 mm at the front, 42 mm high at the back (50°). At the back, about 1 cm overhanging, is a wooden handle, 8.2x3x11 cm. Blade cap, 54x42/21x7 mm, with an 8 mm screw and knurled head Ø 14/15 mm. The cap is made from pressed sheet metal and painted red. Fine and lateral adjustment with two nuts.

Iron: 44 mm with vertical and two side slots for adjusting the blade. Cutting angle: 50°