Pressed cast steel body with side stop on two round, 140 mm long, 8 mm iron rods. Plane section. From the front: 8 mm borehole with clamping screw on the left. Vertical 6 mm borehole with clamping screw on the right for depth stop (missing). Side bar 4 mm thick, running towards the back. Left side, 7 mm cutout for 45° iron stop and cap holder. In between, loose blade cap 37x7/10x17 mm with a 5 mm thread and knurled screw Ø 12 mm. 8 mm borehole with clamping screw on the left for the rear iron rod.

Side stop. Pressed cast 111x10/42x15/40 mm from base angle, connected by a bow, with angled pieces lying in 16 mm long, 8 mm tubes with clamping screws. All cast in one piece. Side clearance 0 to 10 cm.

Iron: 5.6 and 11.5 mm Cutting angle: 45°

Mark: RAPIER encased