Door Plane for Frames.

Planes to the right. Two side-adjustable plane bodies slanted upward.

Two 11 cm long, 2.9×1.1 cm thick wooden strips are inserted at a 15° angle into the right plane body, passing obliquely through the left plane body. This allows for shifting the right plane by approximately 6 cm (from 1.5 cm to 7.5 cm) to the right and up to 2 cm upward.

Right Plane: 25×3.2/2.2×3.6 cm. Outer edges rounded, wooden wedge.
Shavings slot on the right.
Upper right: 25.3×9.0×9 cm wooden piece, hollow-rounded at the bottom, glued on.
Includes the described wooden strips, flush-mounted on the flat side.
Depth stop: Fixed at 0.7 cm.

Left Plane: 25×4.9×8 cm. Outer edges rounded, wooden wedge.
Shavings slot on the left.
Side: Two 15° slanted slots (3.1×1.3 cm).
On the left: Each slot has an iron screw (⌀ 7/13 mm, metric thread 60° DIN 13/14, 1.25 pitch), with large hidden nuts for locking the slanted adjustment.

Right side: 4.9 cm flat with a 0.8 cm step, acting as a fixed depth stop (1.2 cm, closed to 0.7 cm on the right).

Left outer side: Flat.
Sole: 3.1 cm, slanted inward at 10°, forming a contact surface for the adjustable side fence.
Wooden piece: 25.3×6.1/4.1/1.8 cm, curved left at 10°.
Two slots (2.2×0.6 cm) with 7 mm wooden screws and washers.

Iron 1: 30 mm, skew-mounted     Cutting angle: ⌀ 50°
Marking: Eye symbol GOLDENBERG (arched), ACIER FONDU A GARANTIE

Iron 2: 16 mm, skew-mounted     Cutting angle: ⌀ 50°
Marking: GARANTIE