Cast base plate with hole and rim.
35 mm iron base behind the hole, with a 40 mm long, 6 mm vertical screw.

Nut with 4 mm knurled edge (⌀ 19 mm) for adjusting the iron depth.
Oval iron yoke with clamping screw serves as the iron holder.

Sole without wood.

Iron: 7 mm, bent at 85° over 22 mm
Shaft: 10×10 mm square, with 4 circumferential grooves at the top
Adjustment scale: 1 inch in 1/16ths
Bevel on top: 35°     Angle (5°) = 40°

Condition: Good.