Profile Plane

Planes at about a 20° tilt to the left. Top edges are rounded and chamfered, with a wooden wedge. Left side is flat. Right side is 3.7 cm flat, then rises to 4.6 cm high, widened by 2.5 cm, and rounded above that with a shaving slot.

Two reinforcing wooden strips (23.8×0.3×2.5 cm) are inserted. Depth stop on the right: 1 cm. Side fence: 0.5 cm. These two fences meet at a 90° angle to each other, but are set at a 20° angle relative to the plane body.

Iron: 39 mm wide, shaft 7 mm, Cutting angle: ~53°