Hollow Shave (Spoke Shave)

The cast-iron body is about 74 mm wide, with oval handles that are 75 mm long. These handles are rounded on top and knurled, each with 8 mm holes. The mouth opening measures approximately 4 × 56 mm, and the chip breaker is about 9 mm.

The body has a 6 mm threaded hole with a screw serving as the lever-cap holder. The lever cap itself measures about 40 × 56 / 64 × 4 mm, with a 12 × 7 mm slot.

The iron is 55 mm wide, with a radius of about 5 cm, and it has an 18 × 10 mm slot. The cutting angle is around 40°.