Molding Plane, Quarter-Round

This right-handed plane has rounded top edges and line decoration. On the right side, there is a wooden strip measuring approximately 21.8 × 5.6 × 0.7 cm, glued and nailed in place. On the left side, about 3.8 cm down from the top, there is a 1 cm step, with a 0.9 cm rounding, followed by 2.7 cm of vertical surface.

At the top, a wooden wedge is fitted. The chip ejection opening is on the left, near the middle. Below, there is a side fence made of wood (about 21.8 × 30 × 1.1 cm), with two bronze inlays (each having 12 × 6 mm slots) and screws to secure it. Inscription: "A.GARANTI"

The iron is about 26 mm wide, set at a slight angle, and the cutting angle is around 53°. The marking reads “ACIER FONDU” (enclosed by longitudinal brackets).