Small Instrument Plane
Smoothing Plane. On a 125 mm long sole, protruding 7 mm at the front and 8 mm at the back, two 110 mm long, 3.5 mm thick bars are welded. Flat on the sides, with three curves at the top ending in two tips, rounded at the back. Iron cap: 31x18/8x0 mm, 6 mm thick, made of bronze and rounded on top, with a 5 mm thread and a 19 mm long screw with a knurled head Ø 10 mm. Swiveling and fastened with a 3 mm cross rivet. Wood insert in front, square, 3.5x1.8x2.6 cm, with a top plate of 2.2x1.1 cm. At the back, an iron stop with a 9 mm wide saw grip worked out with an oval hole and a long tip. The wood is fastened with two cross rivets at the front and three at the back. The sole is flat, chip hole at the top. Mouth: 5x19 mm.

Iron: 17 mm, bevel on bottom

Cutting angle: 48°