Bullnose Plane – Cornice Plane, Bronze Body

Bronze cast body. At the front, a 5 mm chipbreaker curves upward over the chip opening, with a rounded profile leading toward the wooden wedge. Below this, the body is recessed up to 10 mm at the sole and 3 mm at the back wall, which contains a wooden wedge insert.

Side walls are oval in shape, with the rear protruding 7 mm. Mouth opening is 2 mm wide.

Iron: 25 mm wide (1″), 13 mm shaft Bevel: approx. 15° Cutting angle: 18° bed + 15° bevel ≈ 33°