Slightly rounded upper edges with line decoration. Mouth on the right side; wooden wedge. Top right has glued-in wood measuring 24.5 × 2.3 × 2.6 cm, secured with two bolts. Iron bed measures 232 × 54 × 3 mm, with a bronze band 232 × 28 × 2 mm, fastened by four screws. Both are fully recessed underneath.

Screw for side iron holder has a 19 mm head. Adjustable depth stop iron: 122 × 16 × 5 mm. Welded flat iron: 92 × 28 × 3 mm with a 45 × 17 mm slot, left side toothed with six 3 mm teeth. Gear sleeve with six round 6 mm long, 4 mm wide teeth. Sleeve length 28 mm, diameter 16.5 mm, central bore 9 mm. Adjusting wheel 39 mm diameter, 4.5 mm thick with 8 mm inner bore and cutout for square washer 19 mm diameter, 6 mm thick, made from bronze.

The edge is bevelled and knurled. Iron plate 29 × 17 × 6 mm with welded 65 mm long 9 mm diameter bolt for locking. Behind, 35 mm radius with a 7 mm square 6 mm long milled section, followed by 20 mm long 7 mm thread. Left side has a slot for the screw plate; right side has a square ring and wing screw for fixing, both bronze.

Adjustment depth 0–2.3 cm. Side fence wood: 24.5 × 2.4/4.2 × 8.8 cm. Inner wooden strip 24.5 × 2.1 × 3.3 cm glued in groove. Lower cornice rounding.

Two holes for wooden screws with rounded recesses for adjustment nuts (Ø 5 cm, width 1.1 cm). Two wooden screws, each with two different threads. Inner length 2 cm; outer 1.5 cm; inside 1.2 cm thread pitch 3 mm. Outer length 8 cm; outer diameter 2.3 cm; inner diameter 1.8 cm with thread pitch 4.9 mm. Small screws with threads secure it inside the plane.

Outside are two nicely turned nuts (Ø 3.2/4.9 cm), 3.5 cm long to lock. Bronze end knobs screwed on the ends of the screws. Side fence adjustable 0–2.3 cm.

Iron: 10 mm wide Cutting angle: approx. 50° Marking: Crown PAULAIX ?