Body flat, sole with nailed chip breaker reinforcement: 4.1x5.5 cm. Slightly wider in the wedge hole area. Front is sawed off, with part of the old mortise still visible. On top, an old dovetail wedge inserted into a 3.5 cm high wooden peg Ø 2.4 cm, retrofitted. Behind it, the letters A C with a 0.2 cm balloon decoration inserted. Large chip hole with a wooden wedge, behind it a wedge band approximately 5.5 cm long, tapering from 2.1 cm to 2.8 cm wide and 0.7 cm deep. Inside, at the back, a 1.4 cm bore, with a wooden peg 2x2.3 cm inserted 5 cm higher. At the top, the wooden body is strongly rounded at the front, 9.5 cm from the side, tapering over 10 cm from 1 to 3 cm.

Iron: 57 mm

Cutting angle: 40°

Mark: WILLIAM ASH & C°