Profile Plane – Right-Handed

Top edges slightly broken. Two wooden wedges, the rear with a 2 mm metal cheek (1.7 × 4.5 cm) acting as cheek stop. Chip opening on top. Right wooden plate 23.5 × 0.6 × 5 cm, rounded underneath. Two ball-headed screws (Ø 17 mm, 21 mm high) with washers. Total screw length approx. 9 cm. Threads metric 60° DIN 13/14 1.75.

Below is a 2.2 cm flat area with chip opening for the front iron. Left side flat with a depth stop 1.2 cm wide, 0.8 cm high.

Front and rear have two square rods, edges 2.5 × 2.5 cm, 22 cm long. Each is screwed through the shaft. An iron nut is hidden inside the rods.

The two-part adjustable side fence slides from 0 to 19 cm. Upper fence part measures 23.5 × 2.6 × 3.3 cm, edges rounded with line decoration. Lower part is angled, 23.5 × 2.6/3.9 × 5.6 cm, with 0.9 cm rounding outside. Includes a 1.7 cm wide groove with a 0.4 cm hollow edge and 1.1 cm flat surface.

Both parts have three-point cuts to clamp the square rods. Fixed with two identical screws as above, nuts hidden outside and visible inside.

Irons: 1. 12 mm, cutting angle approx. 56° 2. 11 mm, cutting angle approx. 50° Marking: Moon face, PEUGEOT FRERES Condition: Good for its age.