Rabbet Plane

Box front beveled at 34°. Rear upper edge rounded. Front serves as mouth adjuster and chipbreaker with 2 mm bronze sheet 11 × 54 mm, with two sliding plates 50 × 12 mm with 40 × 4 mm slots and two bronze wood screws.

Above is a wedge holder 2 × 16 mm bronze clip 56 mm wide, 34 mm deep, recessed into the side of the box and fixed with two screws. Front has a curved removed clip.

Below is a wooden wedge 5.2 cm wide, large upper rounding, bottom rounded to 3.3 cm wide, rounded front. Sole with tip removed, standing at a 90° angle upwards.

Side lengths 3.8 cm.

Iron: 30 mm wide, bevel (sharpening) on top. Cutting angle: approx. 35°.