Rabbet Plane

Plane hollows on the inside left. Body flat on top with two square rods 1.8 cm × 8 cm long (+ 3.6 cm inset). Flat underneath with open slot 2 × 3.6 cm for wedge, blade, and forecutter. Irons rest in a groove each. Chip opening in the wooden part.

Inside (top) wooden wedge and two wooden splints Ø 7 mm to hold square rods. Fence beveled on top, after 4 cm outside at 0.8 cm thickness, beveled, with two clamp wedges 1.5/1 × 0.9/0.5 cm and 10 cm long.

Two square holes for sliding rods. Flat underneath and inside with two wedge holes.

Fence is adjustable from 1.5 to 5 cm over the iron.

Iron: 10 mm wide. Cutting angle: approx. 65°. Marking: GOLDENBERG.

Forecutter: 9 mm with two sharpened points, approx. 75° angle.