Planes left-handed (inside barrel rim). Body flat on top with 11 cm gap, two 9.2 cm long 2.4x2.4 cm square rods each with a 145 mm long 11 mm flat head screw Ø 24 mm and 20 mm square nut screwed through the rods. Right wood wedge, below wood strip 18.8x3x1 cm screwed as wedge slot cover. At the bottom, a two-part 3.5 mm iron circular section as tongue with 3 and 4 screws fixed and a 15 mm head screw on washer as iron clamp. In the middle, 4x20 mm iron in horizontal wood slot, with curved 50x15 mm iron as depth stop with 50 mm long 8 mm screw, metric thread DIN 13/14 1.25, and wing nut as clamp in iron slot. Above the depth stop, slotted iron 58x15 mm with two screws.

Stop (at barrel stave ends) top 19.1x9.1 cm, 2.6 cm thick, left round with deep longitudinal groove. Two square holes 2.5x2.5 cm for vertical slide bars, each with a cross slot 3.4/3.5x0.6 cm horizontally open to square hole. As widening, an outside downward beveled 19 cm long approx. 4 cm wide wooden ring screwed on. Clamp wedges approx. 3.2x0.6x12 cm. Groove 0.7 cm wide up to 1 cm deep.

Iron 7 mm with backstop Bevel: approx. 50° Mark: Moon face PEUGEOT FRERES