Planing to the right. Rounded edges. Flat on top with a wooden wedge and iron hole. Left side flat. Right side top and bottom with a rounded strip, 20.2x0.9x3.6 cm glued on. 1.4 cm below that and 0.9 cm inward, a two-part 3 mm iron plate, 20x25 mm, is attached with 5 screws. On the left, a 1.4 cm high side stop, 1 cm away from the iron. A 5 mm screw for lateral hold of the iron.

Iron: 8.5 mm, shaft: 6 mm

Cutting angle: 53°