Coachwork plane. Profile plane. Cuts on the right, sloping 15° down to the left. Upper edges rounded. Wedge opening on the right. Rear upper chamfer with attached ebony knob 17×14×6 mm and a 50° slanted taper toward the front. Right side: 1.5 cm flat, then 1.4 cm widened, slightly hollow, 1.9 cm flat. Bottom depth stop 0.8 cm wide, angled 15°. Shaving slot fully open at the top.

Left side flat below, side fence 1 cm wide, angled 15°, standing at a 90° angle to the depth stop.

Iron: 21 mm
Cutting angle: ~50°