Plough Plane with Square Wooden Rods. Upper edges lightly rounded. Wooden wedge. Shaving slot on top. Wedge mortise at the front with light decorative shaping.

The tongue is made of two-piece bronze, 265 × 25 / 60 × 7 / 13 mm, screwed at the front and rear. Within the wedge mortise it is raised as an iron stop and secured with screws, additionally held laterally by two 4 mm through-bolts. Fixed cutting depth 2.5 cm.

Side fence measures 26.5 × 2.2 / 3.9 × 10.2 cm. Underneath, a glued-on round rod 3 × 1.7 cm forms a 0.5 cm edge at a height of 3 cm. Two square openings 1.8 × 1.8 cm are provided.

In the upper wooden section (2.2 cm wide), two slots are cut: 4.3 cm deep, 3 cm long, and 0.8 cm wide. These hold the clamps for the 13.5 cm long square guide rods. Each clamp consists of a square plate 30 × 30 × 7 mm with a central square hole 19 × 19 mm.

The recess is closed with an iron plate 41 × 13 × 5 mm, decorated with four incised lines, with an 8 mm hole and a welded Whitworth 55° 14G 7/16" thread beneath. An old-style wing nut with high wings locks the rods in place. Side fence adjustment range from 0 to 11 cm.

Iron: 9 mm
Cutting angle: ∠ 43°
Mark: EBANEY & SON monogram — CAST STEEL