Body with lightly rounded upper edges. Wooden wedge. Upper side piece 23.7 × 2.5 × 2 cm, glued into a sliding dovetail (slightly warped). Iron skate 229 × 55 × 3 mm, made in two parts and fixed with four screws. A screw with a 20 mm head acts as the lateral iron holder.

The depth stop is an iron plate 103 × 13 mm with an 85 × 27 × 3 mm steel pad welded on, containing a 30 × 8 mm slot. The guiding slot block 55 × 12 mm is fixed by two screws. The locking screw for the depth stop has a 2 mm thread, 55 mm long, with DIN 1.25 brass wing nut. Depth adjustment from 0.6 to 2.7 cm.

Side fence: wooden strip 23.7 × 2.7/4.8 × 9.2 cm, made in two heights (3.6 cm and 5.6 cm) with triangular notches for guiding rods. Bottom is double-rounded. Two clamping screws Ø 8 mm, DIN 1.5 thread, with wing nuts and washers.

Two sliding rods 19.5 × 2.7 × 2.7 cm, the upper edges fitted with two perforated ball-head screws Ø 17 mm, length 70 mm, WW 14G (7/16") thread, Ø 8 mm at the shank. The nut is inserted sideways into a concealed slot in the rod. Fence spacing adjustable from 0 to 1.7 cm.

Iron: 10 mm with lateral back-bevelled shoulder
Cutting angle: 50°
Mark: PEUGEOT FRÈRES