Rabbet Plane. Cuts to the right. Upper edges on the body and on both fences rounded. Body flat on both sides; rear rounded to form a striking button. A glued-in edge reinforcement (1.5 × 1 × 1.6 cm) is fitted underneath. Wooden wedge. The scoring cutter is fitted as a wedge beneath the depth adjuster. Shaving slot on the right.

The depth adjuster is a wooden block (23.6 × 1 × 6.5 cm) with a shaving cut-out, adjustable in two 60° angled slots using two screws with metal washers. Cutting depth adjustable from 0 to 1.4 cm. On the left, a wooden side fence (6 × 9 cm) is mounted on two 12 cm long wooden screws with ball-shaped heads. Thread diameter approx. 2.3 cm (inner 1.8 cm), thread pitch 5.1 mm. Two turned wooden nuts, 5 cm long (Ø 4.7 / 3.3 cm), with two round locking nuts Ø 5.5 cm and 0.9 cm thick. Fence position adjustable from 0 to 2.5 cm.

Iron: 28 mm, skewed; left-hand shaft 11–9 mm
Cutting angle: ∠ approx. 40°

Scoring cutter: 13–19 × 2 mm
Cutting angle: ∠ 90°

Condition: Unused