Round-Grooving Plane. Cuts to the left. Two-part construction. Edges chamfered; front and rear upper edges rounded. Outer surfaces decorated with carved braided ornament and 7 mm star motifs. The working body has a wooden wedge above and a shaving slot on the left.

Two 1.6 cm diameter through-holes; below these are two rounded grooves. Left side flat with a depth stop 1.1 cm wide and 1.2 cm high. Upper side fence has two slots for wooden clamping wedges and two 1.6 cm holes, positioned 2.7 cm down from the top and offset 0.9 cm to the right. Underside features a rounded section between two grooves. Left side flat and bevelled at the depth-stop height of 1.1 cm.

Fitted with two wooden guide rods, 1.6 cm square, lengths 13 cm and 14.5 cm, each with turned handles 7.5 cm long and chamfered ends. Adjustable side spacing from 0 to approx. 7 cm.

Iron: 14 mm
Cutting angle: ∠ 42°
Mark: INRI