Profile Plane (Reverse Cove Plane). Cuts laterally to the right. Upper edges rounded with line decoration. Left wall flat with the lower edge rounded by 1 cm. Wooden wedge fitted from above. On the right wall, a wooden strip 22.5 × 3.5 × 1.1 cm is fitted; below it the profile narrows to 0.3 cm with two edges and two roundings. Beneath this, the iron is open laterally by 3.5 cm; at the sole it is recessed 0.1 cm from the base, forming a 0.7 cm hollow groove.

Iron: 7 mm wide, skew-ground underneath, with a 7 mm hollow-round grind on the side and an upward side grind
Cutting angle: ∠ 88°

Condition: Good; two longitudinal shrinkage cracks.