Round-Grooving Plane. Cuts to the right. Upper edges rounded on the outside, with a wooden wedge. On the right side, a glued-on wooden section 30 × 0.8 × 3.3 cm, chamfered below, continuing underneath into the rounded sole profile. Shaving slot on the right. Left side flat with a depth stop 1.2 cm high and 2.2 cm wide.

Fitted with two 2.2 cm diameter holes for the 17 cm long sliding rods, which are nailed in place. The upper side fence has two rod holes (2.2 cm). From front and rear, the wood is slotted up to the rods to allow clamping with 8 mm iron screws (metric 60°, DIN 13/14, pitch 1.25), tightened with 25 mm high aluminium nuts Ø 25/40 mm. A glued-on wooden block 30 × 2.2 × 3 cm is fitted underneath on the right. Side spacing adjustable from 0 to 12 cm.

Iron: 10 mm wide, 11 mm thick
Cutting angle: ∠ 51°
Mark: Winged lion — PEUGEOT FRÈRES, Cast Steel