Tongue and groove plane with double handles. Includes a tongue that is completely worked from the solid. Right-hand cutting. Front and rear each have a triangular handle that is rounded and flattened on top, narrowed down to 3.3 cm on the sides. Shaft semi-circular 14 cm in diameter. Wooden wedges with an external setback stop. Iron-wood wedge split is open on the outside. Chip slot on both sides. Guide tongue at the bottom center 42x0.8x1.8/2.3 cm. Groove side with a feather 0.7 cm, distance to the side stop 1.2 cm. Fixed depth stop at 0.8 cm. Feather side wooden tongue 1.4 cm, gap 1.3 cm. Wood at side stop 0.9 cm. Feather height 0.7 cm. Groove iron 10 mm with a setback lug, angle 44 degrees. Feather iron 11 + 15 mm, gap 10 mm equals 36 mm shaft 14 mm L 44 degrees.