Small bookbinder’s plane.

Special small plane.

Plane part: Rounded 1.5 mm steel plate (79×62 mm) with two riveted guide rods (6×15×20 mm) in bronze, with 6 mm bore and 3 mm set screws.

The plane body is made of beech wood, rounded at the front and back, with an ebony wedge. It is triple-screwed from below onto the steel sole.

Fence part: Bronze holder (18/10×75×3 mm) with two riveted 6 mm threaded cams (6×15×18 mm), the left one is rotatable. Two 250 mm long rods are screwed into it, all made of bronze.

Iron: 13 mm, sharply ground, bevel on top
Cutting angle: ⌀ 30°