Trapezoidal-shaped shaft, rounded at the front and back.
Two wooden handles, 6 cm high, ⌀ 2.5/4.5 cm, each with four grooves.

Iron holder made of bronze.
Screw: ⌀ 8 mm, WW 55° 18G 5/16" thread, with perforated square.
3 mm thick support plate (35×45 mm) with square hole.
Wing nut on a support washer (⌀ 25 mm).

Iron: 7 mm, 86 mm long, 6 mm square, angled 18 mm at the bottom.