PULL PLANE
Front block is 11.5 cm square, 5.4 cm high, with edges slightly rounded at the top. The shaving slot is about 3 cm wide at a 45° angle, then 1.3 cm vertical. Side walls are 9 mm thick, fully rounded at the top and bottom. A 60 mm long, 6 mm diameter nail is driven in from the right as a wedge abutment.

Behind the iron is a 20 cm long round rod (Ø 1.3/2.0 cm) driven through. The top is beveled toward the rear. The sole is flat. The mouth is 14.5 cm from the front, measuring 1.3×5.1 cm. A wooden wedge is in place.

Iron: 51 mm, with a hole and slot nearly reaching the cutting edge
Cutting angle: approx. 40°
Marking: PEUGEOT FRERES above a lion, “A GARANTIE MADE IN FRANCE”