Grooving Plane

The top edges are slightly rounded and have line decorations, and it uses a wooden wedge. On the left underside, an iron strip (46 × 3 × 4 mm) is attached along the entire length with six screws. From the inner portion, a separate strip with concealed slot fittings can be lowered about 8 mm and secured with two screws on the left side, serving as an adjustable side fence.

The sole is a two-piece T-shaped iron (about 223 × 23 × 9 mm), fastened with ten screws. Its center “tongue” is 7 mm wide and 5 mm high. Next to it, the sole acts as a 5 mm depth stop. The left side fence is about 8 mm thick and can extend 5–13 mm. On the right side, there is a 12 mm-diameter screw that clamps the iron. The mouth measures around 9 mm.
LOURDIN OUTILLEUR. AUPUY HTE LOIRE.

The plane iron is about 8 mm wide, with a cutting angle of roughly 50°. Marked “CAST STEEL,”
Conserved.