Bullnose Plane – Cornice Plane

The body is a 12 mm bronze plate, hollowed out with a chip opening and slots for the wedge and iron. The chipbreaker is 18 mm thick, and the mouth measures 5 mm. At the front, there is a 25 mm vertical face, followed by a rounded section between two steps and a cove-like profile at the top.

At the rear, it’s 40 mm flat with a 4 mm recess, then 36 mm vertical. An iron screw (head Ø 11 mm) is used as a striking knob.

Iron: 12 mm wide with a 5 mm shaft, Cutting angle: approx. 29°