Grooving Plane with Wood Screws

Top edges slightly rounded with line decoration. Chip opening on the right, wooden wedge. Iron tongue 224 × 43 × 3 mm in two parts, nailed into a 2 cm wooden slot.

Adjustable depth stop iron 130 × 20 mm with flat iron 100 × 31 × 5 mm, 9 mm slot, blocked by a 7 mm screw with square head and wing nut on the right. Thread metric 60° DIN 13/14 1.25. Depth stop adjustable to 2 cm.

Left side fence wood 23 × 2.3/5.6 × 9 cm. Lower cornice rounding. Nut wood block glued to walnut resting surface.

Two wood screws embedded in the shaft, secured with two iron screws. Holes covered with two half-round pegs on the right.

Wood screws with ball heads 16 cm long, Ø 2.0 cm outside, 1.9 cm inside, 1.5 cm thread pitch 4.2 mm. Two adjustment nuts Ø 5.2 cm, 1 cm wide.

Two turned wood nuts Ø 3.3/4.1 cm and 5.5 cm, 5.5 cm long, clamp the side fence between 0.8 and 8 cm.

Iron: 6 mm wide Cutting angle: approx. 50° Marking: Lion, PEUGEOT FRERES