Profile Plane (cornice moulding)

Top edges eased. Right side 3.6 cm flat, with a hollowed widening of 2.4 cm below it, interrupted by the shaving slot. Left side flat; a 24 × 1.3 × 0.6 cm strip screwed on at the lower edge. Two edge reinforcement inlays, each 24 cm long, 0.4 × 2.2 cm wide and deep. Fixed side fences on both sides, angled at 20°.

Iron: 30 mm; shaft 6 mm; cutting angle ∠ 55°.