Smoothing Plane. Double iron. Iron body with three stepped front roundings, rounded at the back, flat sides, 4 mm wall thickness. Three screws secure the front wooden infill, which has four roundings and four edges. Front rounded wood infill 5/3, 3×6.5×4 cm.

Bronze lever cap 80×59×0–13 mm with a top round nut Ø 20 mm, tightened by a 52 mm long, 12 mm cylinder-head screw, thread WW 14G 7/16". Head knurled Ø 25 mm. The cap pivots on four lugs seated in the side walls.

Rear 40°-bevelled wooden infill approx. 19×6.3/3×12 cm with a fully carved closed saw-handle; hand hole 6×3.5 cm.

Double iron: 56 mm (2¼″)   Cutting angle: 40°
Markings: WARRANTED CAST STEEL; CHARLES TAYLOR’S SHEFFIELD TOOLS LD (framed)