Body made from a 4.5x4.5 cm piece of wood. The top front near the chip hole is reduced to 3.1 cm thick with a 1.3 cm high nose, 1.3 cm wide on both sides, and beveled at the bottom. Chip and wedge hole reinforced on the outer side with a 1 mm thick metal plate, 77 mm long, 24-34 mm high. Inside, a 50 mm long, 8 mm bolt serves as a wedge support. The wedge, made of 5 mm sheet metal, simultaneously acts as a pointed iron cap below. Bent upwards, the iron cap is 78 mm long, with a 24 mm wide screw at the top, 6.5 mm thread, 20G ¼", With Worth 55° thread. Additionally, a 44 mm long, 20 mm wide slotted screw presses down on the iron. The entire sole is reinforced with a 3 mm iron plate, fastened with 10 countersunk screws. Mouth size: 35x7 mm.

Iron: 31 mm, only 2 mm thick, Cutting angle: 67°