Window Plane for Frames with Putty Rebate.

Planes to the right. Two planes screwed together on the side with six screws.
Top edges rounded with line decorations. Two wooden wedges.

Right Part: Upper right strip (23.6×0.8×3.5 cm), hollow-rounded at the bottom, screwed onto the plane body (23.6×1.7×6.5 cm). Sole is flat underneath, with a shavings slot on the right.

Left Plane: 3.7 cm wide, 7.8 cm high, with a stepped 15° incline and a 2.4 cm wider sole.
Side fence: 1.5 cm high and 1.3 cm wide.
Sides flat, with a shavings slot on the left.
Right side: Wedge slot open, closed off by the right plane half.

Usable wood dimension: 3×3.5 cm.

Iron 1: 24 mm, skewed     Cutting angle: ⌀ 50°
Iron 2: 19 mm, skewed     Shaft: 13 mm     Cutting angle: ⌀ 50°

Marking: "Tellskapelle" stamped on both irons.