Window Plane for Frames with Putty Rebate.

Planes in the middle. Two-part construction, fastened with six screws on the side.
Top edges chamfered, front and back rounded. Three wooden wedges.

Right Part: Upper strip (25.7×1×2.8 cm), hollow-rounded at the bottom.
Middle: 2 mm groove with two shavings slots.
Below, a second strip (25.7×1×3.1 cm), beveled, also hollow-rounded.
Bottom side fence: 1.4 cm wide (including 4 mm wooden inlay), 8 mm high.
Sole width: 1.1 cm (with wooden inlay, only 7 mm wide).

Left Part: Flat, with shavings slot and screws.
Sole: 3 cm flat.
Below, a left side fence (211 mm long), made of 3 mm bronze, with an 11×11 mm angle.
Slotted projections: 30×18 mm, slots: 6×30 mm.
For wood widths up to a maximum of 4 cm.

Iron:
- Left front: 26 mm, 20° skewed, profile
- Right: 13 mm, 17° skewed, groove
- Rear: 14 mm, with profile
- All cutting angles: ⌀ 50°

Marking: ACIER FONDU GARANTI