Groove plane with wooden screws. Top edges rounded. Chip hole on the right. Wooden wedge. Iron tongue two-part 240x38x3 mm. Underlay iron 240x16x6 mm with 6 screws attached. Adjustable depth stop 160x17 mm with two vertical flat irons 80x11x5 mm. Secured with a milled flat iron 75x16x4 mm and in its center, a welded 55 mm long, 6 mm screw with a bronze wing nut on the right. Depth stop from 0 to 1.8 cm. Side stop on the left, L-shaped wood 24x2.4/3.6x8.5 cm, provided with a groove and counter-curvature at the bottom. On the left in the plane, there are two 17 cm long wooden screws, diameter outside 2 cm, inside 1.7 cm. Thread pitch 3.5 mm. In the stop, there are two adjusting nuts, diameter 5 cm, recessed. To secure these, two turned nuts, diameter 3-4 cm, length 4.7 cm. Side stop from 1.2 to 13 cm.