Scribing Gauge & Veneer Cutter combined. The rod 23x2.4x2.4 cm has two iron points 0.7 cm apart at the right end below the stop. On the left of the stop, on the side, two tips are positioned 1.7 cm apart. The vertical bore is a hole 0.7x1.1 cm, continuous for the blade and wooden wedge. The stop is 3.5x8x9.8 cm, rounded at the top, with a 2.4 cm square hole, and above that, 1.6x1.2 cm and 1.3x1.2 cm square holes for the 12.5 cm long clamping wedge and a 1.4/1.4 cm piece of mahogany. The blade is 108 mm long, projecting 9 mm, the cutting edge is angled at 60°, and the front is beveled at 3 mm and sharpened to a length of 13 mm. The shaft is 12x4 mm, with a crown of 9x9 mm, standing vertically.