Smoothing plane.
Front sole extends 4.5 cm forward, with a nose (4.5×3.5×10.7 cm) and an upper ⌀ 2.8 cm bronze ring (⌀ 23 mm) with a sliding groove.

50 mm long, 6 mm screw with thread in the adjustable chipbreaker block (4×4.9×2.3 cm) embedded in the sole. Behind that, a shavings slot and wooden wedge.

Iron with 2 mm sheet metal (62×45/19 mm) with two bent tabs and a 27 mm long, 3 mm slot, secured with a screw and washer on a 12 mm adjustable wedge.

Hand guard under the blade and striking knob (⌀ 22 mm) at the rear. Sole is zig-zag laminated.
Mouth opening: up to 0.5 cm.
Side grooves above the lamination.

Iron: 47 mm with slot     Cutting angle: ⌀ 48°

Marking: G. NOORMANN & SOHN