Fiber Plane

Cast aluminum body, 6 mm thick. Sole is flat with an 11 mm longitudinal rib.
In the center, a 115 mm long mounting piece, 5 mm high at the front and back, with 5 mm threads. Between these is a 13 mm block, 73 mm long, flush with the sole on the left side and beveled at a 45° angle, with two threaded holes for the slanted lower part.

3 mm thick clamping plate, 70×20 mm.
Fence made of 273 mm long aluminum T-piece, 27×18 mm. It narrows from 18 to 13 mm near the blade and widens again to 55 mm next to it.
Two slots (5×24 mm) allow the fence to be adjusted from 0 to 1.5 cm.
Four cylinder head screws (Ø 5 mm) of 15 and 17 mm length with Ø 10 mm heads.
Front knob: ball-shaped, 7.5 cm tall, Ø 2.4/3 cm.
Rear handle: 6/2.7×2.2×11.3 cm with long screw, both made of wood.

Blade: Standard utility knife blades
Clamping Plate: 70×20 mm, 3 mm thick, held with two screws