Body 16.4 × 5.1 × 6.3 cm, top edges rounded. Top: depth adjustment wood block, trapezoid 3.9 cm wide. Rearward sloping shaving slot, 2.9 cm wide at back, sides recessed, top sidepiece extended 2 cm, rounded at front. At lower left, inset square bronze nut 12 × 14 mm. Below, 2 mm bronze plate 30 × 40 mm with three screws, securing chipbreaker and thumb-sized adjuster. Behind this, finely carved wooden wedge and iron. Trapezoid slot 5 × 4 cm, through. Sole cut with 90° corner, tip upwards. Side lengths 3 cm. At front left, 3 mm bronze trapezoid plate 15 × 41 mm with slot, 8 × 29 mm screw. Bronze screw 8 × 29 mm, length 18 mm, thread WW 55° 18G 5/16″, head Ø 13 mm, securing the depth-adjustment trapezoid.

Iron: 39 mm; bevel down; cutting angle ∠ 47°.