Side wall plane. Cast iron form.

Iron side with 38° 12 mm planes as iron stop. Two vertical recesses 13 mm wide with 5 mm threads for the iron caps 13x4/6x22/29 mm. Only tongue 83x14 mm 3 mm thick and below 5 mm bevel for dovetail groove. Center with 7 mm hole, above 7 mm bridge, which widens towards the ends and is notched outside (hand guard). Back flat with recessed brand marking. Both sides mouth 6x14 mm in front of tongue extensions in 13 grooves recessed and fastened with screw. Ended with a bullnose plane (corner cleaner). A beveled 2 mm sheet with side slits serves as corner cleaner.

125 mm long depth stop. Adjustable 0-15 mm. Four 16 mm long 5 mm screws with 7 mm thick ribbed heads Ø 12 mm with groove hold the iron and the depth stop. By turning the tongue extensions, the chipbreaker can be shortened from 20 mm to 5 mm.

Iron (left cut): 14 mm width 12 mm, 60° ground obliquely and 30° obliquely set = 90° vertical cut. Cutting angle: ∠ approx. 5°

Iron (right): mirror image identical.

Mark: STANLEY MADE IN ENGLAND
On both irons.