Groove-cutting plane, cuts on the left inner side. The body is flat on top (beneath the side fence) with two 5.5 cm wooden screws, outer Ø 16 mm, inner Ø 12 mm, thread pitch 3.6 cm. Inner nuts 1 cm and 1.1 cm wide, Ø 3.7 cm and 4 cm. Right side flat with two wooden wedges and two wooden pins holding the wood screws. The sole (left) is lengthwise rounded with a roughly 1 cm-wide, 0.6 cm-high rebate. The **fence** is flat inside, with two through-holes 1.5 cm apart. Two outer nuts, each 1.5 cm wide and Ø 3.8 cm, sit above the 8 cm-wide wing. Underneath (inside) are 4 mm-deep recesses for the inner nuts. Left side bent, edges chamfered.

Iron: 10 mm
Cutting angle: ∠ ca. 50°
Mark: GOLDENBERG CAST STEEL
Scoring Iron: 11 mm, two-point, ∠ ≈ 5°
Conserved