Shoulder Plane – Carriage Maker’s Model

U-shaped iron body, 3.5 mm thick walls, reinforced sole. Side walls curve upward with a 30 × 14 mm slot beneath. Plastic ball-shaped handle in front and rear handle with blade reservoir.

New blade holder with a lug in the U-iron having two threads at a 40° angle. 8 mm threaded bolts on both sides. An oval yellow plastic depth adjuster screw with a 34 mm black plastic knob with a round sliding groove.

Above it is a cast piece (80 × 30/50 × 0–21 mm) serving as the lever cap, with an internal steel spring as the blade clamp.

The blade measures 47 × 22 mm, with a hole and slot, and a yellow plastic eccentric lever in between. Under the cap is a 26 × 14 mm steel guide with triple engagement. The whole assembly is secured by a 30 mm long, 7 mm cap screw on the lower base thread.

Blades: 50 × 10 × 2 mm (3 spares) Cutting angle: approx. 40°