Grooving Plane with Wooden Rods. Upper surface with double line decoration. Wooden wedge. Two-piece iron tongue 225 × 45 × 2 mm set into the groove and fixed with six rivets. Depth adjuster iron 123 × 11 × 5 mm with an inset flat iron 70 × 25 × 4 mm, with a 25 × 8 mm slot. For locking, a 50 mm long, 7.5 mm screw with 3 mm thread pitch (neither WW nor DIN); the nut is missing. Depth adjustment range 0 to 1.6 cm.

Two round wooden rods Ø 1.8 cm with 6 cm long grips on the right, Ø 1.9 / 2.8 cm. Rod length 21 cm. Wooden side fence 22.5 × 1.9 / 2.8 × 8 cm made from a single piece. Bottom rounded. Two 20 mm transverse bores fitted from above with internally inset ring-head screws, bore Ø 22 mm. Above this, pointed iron plates 60 × 17 mm fixed with two rivets. Old-style iron wing nuts used to raise the clamping rings. Thread slightly coarser than the depth adjuster, neither WW nor DIN. Side spacing adjustable from 0 to 9 cm.

Iron: 7 mm
Cutting angle: ∠ 47°

Old, otherwise sound. One wing nut missing.