Pattermakers Removeable Sole Plane with Five Soles. Smoothing, roughing, and hollow moulding plane with 5 interchangeable soles and irons. Cast bronze body, wall thickness 4 mm front and 10 mm back. Sole 5 mm. Wall height all around 15 mm, rounded at 39 mm height at the iron. Inside, rounded 35 mm long side walls as wedge supports. 75 mm from the front: bronze rod, between wood filling 6.6x4.1 cm with wooden knob 5.3 cm high Ø 2.4/3.9 cm with bronze screw. Behind the iron, 12.7 cm from the front, second bronze rod 27 mm high and about 8 mm wide. Between them, wood inlay 16x4.1 cm as a saw handle, 14x2.5x10.5 cm, hole 7x4 cm. Bronze cap sole flat, 0 mm. Mouth 15x42 mm, two bayonet slots Ø 11 mm, length 21 mm with four countersunk iron screws in two wood inlays. Five attachable soles (dimensions above) with two 6 mm iron wood screws with countersunk heads, which protrude 7 mm and fit into the bayonet slots of the plane sole. Mouths 9, 7, 9, 10 & 8 mm.

5 Irons: 41 mm = 1 5/8" Cutting angle: 43°

Mark: ALEX MATHIESON & SON, GARANTIE in crest, CAST STEEL on all 5 irons.