Fiber Plane – for chamfering fiberboards.

Cuts to the left, fence on the right, with a shavings slot (2.5×3.5/5 cm).
Top is flat with a hole (7×3.5 cm), chamfered at 45° as an iron bed.

Flat iron bar (2×60×18 mm) with two screws as an iron holder.

Left side flat.
Bottom is flat with a 7×0.6 cm recess for the 45° chamfer.

Blade cuts a 5 mm wide, 45° edge.
Cutting angle: ⌀ 0°