Body consists of four parts screwed together. Front holder: 11.8×2.3×1.9 cm with chamfered edges.

Two guide rails: 14.6×2.1×1.8 / 3.4 cm, angled at 45°, spaced approx. 2.2 cm apart. They have half-dovetail cutouts at the back.

Shaft: 12×3.5×3.5 / 4 cm, edges are chamfered.

Left side: a 2 mm bronze plate (53×20 mm) fastened with two screws at the mouth opening, behind which the shavings exit. At the back, a wooden wedge and iron block (3.2×1.5 cm) run through.

Iron: 32 mm, short
Bevel on bottom: wedge angle ~20°
Cutting angle: ~30°

Condition: Good, slightly wobbly.