Sole with raised sidewalls. Front with wooden handle, screwed onto the sole, Ø 1.7–2.5 cm, 3.5 cm high. At the back, a curved shell 41x65 mm with side flanges, spot-welded to the sidewalls. In the middle, U-shaped sheet metal 56x41 mm with 14 mm side struts, spot-welded laterally, with 6 mm threads in the middle, above it an 18x13 mm hole. At the top, 11 mm apart, two bent half-rounds with 4 mm threads in a U-sheet metal slope at 45°. Inside, a 38 mm long, 4 mm screw with a 3 mm bronze head Ø 20 mm for adjusting the iron height. 6 mm thread with 26 mm long bronze screw and an 8 mm knurled head Ø 16 mm for holding the iron cap 40x60 mm. Mouth: 6x45 mm.

Iron: 40 mm, with longitudinal slot 8x28 and cross slot 19x4 mm

Cutting angle: 45°