Molding Plane – Hollow Profile m.A.

This right-handed plane has rounded top edges, incised line decoration, and uses a wooden wedge. On the right side, there is a wooden strip (approx. 18.3 × 0.7 × 2.7 cm) with a rounded lower edge. Below that, the iron is exposed and includes a chip ejection opening.

The depth stop measures 0.3 cm in both width and height. On the lower left side, there is a flat side fence measuring about 0.6 cm wide and 0.3 cm high.

The iron is 7 mm wide and includes a recoil notch. The cutting angle is approximately 55°. Marked with a crown and “COLAUX AXC.”